 |
BMH-1067
BMH
The meat grinder is a meat processing enterprise in the production process, the raw meat according to different process requirements. Granular meat fillings with different processing specifications. In order to be fully mixed with other excipients to meet the needs of different products. When it works, the raw meat is chopped by the shearing action formed by the rotating cutting blade. And the perforated blade on the orifice plate. And under the action of the screw extrusion force, the raw materials are continuously discharged out of the machine. Corresponding tools and orifice plates can be configured according to different material properties and processing requirements. In this way, particles of different sizes can be processed to meet the technological requirements of the next process. The main components are made of high-quality stainless steel. Because it is non-polluting to the processed materials and conforms to food hygiene standards.
Details Show、
Product Specification
Product name | Meat mincer |
Model | JQ-2 |
Rated voltage | 220V/50Hz |
Motor Power | 1.1kw |
Production capacity | 300-400kg/h |
Slice thickness | 3.5mm |
Total Weight | 83kg |
Dimensions | 580*420*780mm |
Attention
1. When adding meat, add an even amount of meat and remove the bones to cause damage to the motor.
2. Turn off the power after use. Then clean the parts, drain the water, and put them in a dry place for later use.
3. If you find faults such as leakage, ignition, etc., you should immediately cut off the power supply and find an electrician for repair.
4. If it is found that the machine is not running normally, the power should be cut off immediately, and the reason should be checked after the machine is stopped.
5. Before use, refer to the instructions for use. If you do not use it strictly according to the operating procedures, you will be responsible for the consequences of any problems.
The meat grinder is a meat processing enterprise in the production process, the raw meat according to different process requirements. Granular meat fillings with different processing specifications. In order to be fully mixed with other excipients to meet the needs of different products. When it works, the raw meat is chopped by the shearing action formed by the rotating cutting blade. And the perforated blade on the orifice plate. And under the action of the screw extrusion force, the raw materials are continuously discharged out of the machine. Corresponding tools and orifice plates can be configured according to different material properties and processing requirements. In this way, particles of different sizes can be processed to meet the technological requirements of the next process. The main components are made of high-quality stainless steel. Because it is non-polluting to the processed materials and conforms to food hygiene standards.
Details Show、
Product Specification
Product name | Meat mincer |
Model | JQ-2 |
Rated voltage | 220V/50Hz |
Motor Power | 1.1kw |
Production capacity | 300-400kg/h |
Slice thickness | 3.5mm |
Total Weight | 83kg |
Dimensions | 580*420*780mm |
Attention
1. When adding meat, add an even amount of meat and remove the bones to cause damage to the motor.
2. Turn off the power after use. Then clean the parts, drain the water, and put them in a dry place for later use.
3. If you find faults such as leakage, ignition, etc., you should immediately cut off the power supply and find an electrician for repair.
4. If it is found that the machine is not running normally, the power should be cut off immediately, and the reason should be checked after the machine is stopped.
5. Before use, refer to the instructions for use. If you do not use it strictly according to the operating procedures, you will be responsible for the consequences of any problems.
English
العربية
Français
Deutsch