 |
BMH-1107
BMH
Gas grills generally use stainless steel as the furnace body material. It is then ignited by electronic pulses, using petroleum liquefied gas or natural gas combustion. Thereby, the heat generated by the combustion is used to heat the high temperature resistant crystal above. Finally, the purpose of baking food on a hot plate or on an iron plate is achieved. Generally, gas grills come with switches for energy-saving component control. The equipped electronic pulse switch can also control the size of the flame to control the temperature of the iron plate. It is a product that is easy to use and has high practicality. And it can be used not only in commercial kitchens, but also in domestic kitchens. There is also an electric version of this gas grill, which is basically the same configuration as a gas grill, the only difference is the use of energy.
Details Show
Product Specification
Product name | Gas Burner Beef infrared grills |
Model | NP-745 |
Dimension | 350*240*380mm |
Material | 304 stainless steel |
Packing material | Box & foam |
Net weight | 12kg |
Gross weight | 15kg |
Attention
1. The gas tank must equipp with a pressure reducing valve, and care should take not to leak gas at the joint.
2. It is forbidden to touch the heat source around the gas tank, and it should place in a cool place without direct sunlight.
3. Air leakage and illegal use are strictly prohibited. Ventilation conditions must ensure in the room where the gas grill is used.
4. During the operation, if it is found that the combustion gas is extinguished, the ignition switch should be turned off immediately, the gas source valve should be closed, and the fault should be checked. After there is no gas in the furnace, the ignition can be re-ignited.
Gas grills generally use stainless steel as the furnace body material. It is then ignited by electronic pulses, using petroleum liquefied gas or natural gas combustion. Thereby, the heat generated by the combustion is used to heat the high temperature resistant crystal above. Finally, the purpose of baking food on a hot plate or on an iron plate is achieved. Generally, gas grills come with switches for energy-saving component control. The equipped electronic pulse switch can also control the size of the flame to control the temperature of the iron plate. It is a product that is easy to use and has high practicality. And it can be used not only in commercial kitchens, but also in domestic kitchens. There is also an electric version of this gas grill, which is basically the same configuration as a gas grill, the only difference is the use of energy.
Details Show
Product Specification
Product name | Gas Burner Beef infrared grills |
Model | NP-745 |
Dimension | 350*240*380mm |
Material | 304 stainless steel |
Packing material | Box & foam |
Net weight | 12kg |
Gross weight | 15kg |
Attention
1. The gas tank must equipp with a pressure reducing valve, and care should take not to leak gas at the joint.
2. It is forbidden to touch the heat source around the gas tank, and it should place in a cool place without direct sunlight.
3. Air leakage and illegal use are strictly prohibited. Ventilation conditions must ensure in the room where the gas grill is used.
4. During the operation, if it is found that the combustion gas is extinguished, the ignition switch should be turned off immediately, the gas source valve should be closed, and the fault should be checked. After there is no gas in the furnace, the ignition can be re-ignited.
English
العربية
Français
Deutsch